Our XPin™ XP-DMD4096 series displays are the only true Plug-N-Play LED based dot matrix displays on the market today! Installation is simple and takes about 15 minutes. Simply replace the original display with your new XPin™ LED DMD display, plug in the connectors, and play your game. There are no wires to splice, no ‘hacking’, and no re-wiring of the cabinet!
Rather than tax an already marginal 20yr old 5V system, we decided to use the already existing +65V supply and efficiently regulate it down to the 5V required using the latest switching power supply design methods. In doing this, we still use the same power connector and data cable that exists in the games today.
Notice for ALL WPC, WPC89, and WPC95 Games:
We have taken into consideration the Well-Known, Well-Documented +65V failures on the original OEM controller board – Many of these WPC Series games out there have a +65V OEM system that may be getting weak after 20 yrs of hard use. The +65V system in WMS WPC games is one of the highest failure points in the display system. We at XPin™ have developed the new X•BRIDGE series which has been designed to operate within the original game supply specifications. This is a Plug-In module that will plug into the same connector locations on the WPC system and “bypass the original supply”, but will provide a solid +65V to your new XP-DMD4096 LED DMD Display.
Though it is NOT necessary, we do highly recommend using our new X•BRIDGE XP-WPCHV or XP-WPC95HV when installing your new XPin™ XP-DMD4096 LED DMD Display, as it is not a question of “if” your OEM controller board will fail, but “when” it will fail.
Orange, White, Blue, Green, Red